4pc 5x127 to 5x114.3 Wheel Adapters 6061-T6 20mm 5x5 to 5x4.5 1/2
4pc 5x127 to 5x114.3 Wheel Adapters 6061-T6 20mm 5x5 to 5x4.5 1/2
4pc 5x127 to 5x114.3 Wheel Adapters 6061-T6 20mm 5x5 to 5x4.5 1/2
4pc 5x127 to 5x114.3 Wheel Adapters 6061-T6 20mm 5x5 to 5x4.5 1/2
4pc 5x127 to 5x114.3 Wheel Adapters 6061-T6 20mm 5x5 to 5x4.5 1/2
4pc 5x127 to 5x114.3 Wheel Adapters 6061-T6 20mm 5x5 to 5x4.5 1/2
4pc 5x127 to 5x114.3 Wheel Adapters 6061-T6 20mm 5x5 to 5x4.5 1/2

4pc 5x127 to 5x114.3 Wheel Adapters 6061-T6 20mm 5x5 to 5x4.5 1/2" Lug

$ 60.7

Items Included: Wheel Adapters & Nuts Center Bore Size: 71.5mm Brand: RDX Racing Spacer Type: Hubcentric With Wheel Centric Lip Type: Wheel Adapter Wheel Bolt Pattern:: 5x4.5" (5x114.3) Spacer Thickness: 20mm Manufacturer Warranty: 1 Year Placement on Vehicle: Front Axle, Rear Axle Other Part Number: Allow 5x5 (Hub) to 5x4.5 (Wheel) Installation Note: Direct Connect; Modifying Factory Studs Could Be Required Finish: Anodized Silver Number in Pack: 4 Wheel Bolt Pattern: 5x4.5" (5x114.3) Manufacturer: RDX Racing Interchange Part Number: Allow 5x127 (Hub) to Use 5x114.3 (Wheel) Vehicle Bolt Pattern:: 5x5" (5x127) Hub Bore: 71.5mm (Hub) to 56.1mm (Wheel) Performance Part: Yes Bolt Pattern: 5x127 (Hub) to 5x114.3 (Wheel) Color: Anodized Silver Material: High Grade T6 Aluminum w/ Class 10.9 Carbon steel wheel studs Thread Size: 1/2"-20 Warranty: Twelve-Month Manufacturer Part Number: CV-187-20B-X2-RDX

Description

Adapter Thickness: 20mm each side Quantity: 4 Pieces Bolt Pattern: 5x5 to 5x4.5 (5x127 to 5x114.3) Center Bore: 71.5mm to 56.1mm Thread Pitch: 1/2" Adapter Type: Hub Centric w/ Hub Lip This adapter set includes open end lug nuts to secure the adapters onto your factory hubs (Your vehicle may have different thread size than what is supplied with this listing. If your factory thread size is different from 1/2" -To finalize the installation, kindly acquire a compatible set of open-ended lug nuts that match your vehicle's original thread specification. Your Factory wheel studs may extend past the surface of the wheel adapters. In this case you will need to: 1. Adjust the factory studs to a shorter length. 2. Check that the wheels have open slots (cavities) between the fastener holes. 3. Replace the factory studs with a new set of shorter studs.

Related products